How to make homemade cake release. Perfect for ensuring your cakes don\u2019t stick in even the trickiest of tins.Skip to the recipe | Recipe FAQsOne type of cake that until now has been missing from my site is a bundt cake. The reason for this is simple \u2013 I find the idea of them a bit scary. Pouring lots of love and ingredients into making a cake, only to find that it won\u2019t come out of the tin \ud83d\ude2c.I decided that the solution was to get experimenting and find the ultimate homemade cake release. One that would give you a cake that rises well, tastes great and, most importantly, doesn\u2019t stick.This cake release can be used for pretty much any type of tin, so if you want to make a beautiful bundt, case-less cupcakes, or a cake shaped like a dinosaur, then keep reading as this is just what you need. Homemade Cake Release FAQsIf it\u2019s your first time making this recipe or you have a question, please take a moment to have a read through my FAQs for some extra tips and allergen information. Why do cakes stick?The liquid in cakes acts as a glue which sticks the sponge to the inside of the tin. Cake release works by creating a barrier between the wet cake mixture and the tin so that the cake cannot glue itself onto the tin.The thing is that from a cake perspective, sticking to the pan isn\u2019t necessarily a bad thing. The cake mixture adhering to the sides helps the cake to rise by giving it something to cling on to. If the sides of your tin are too greasy, the cake will keep slipping down them and not rise properly. Don\u2019t believe me then have a quick watch of The Great British Bake Off Season 4, Episode 1 where they made Angel Food Cake (for which you shouldn\u2019t use any tin liner at all).*SPOILER ALERT* (although its years old so you should have watched it by now!)The ones who greased the tins had a much flatter, denser cake and did not do well in the challenge.All of my testing suggests that using a combination of flour and fat (butter, shortening or oil) is a great way to create a barrier between the cake mixture and the tin. The fat provides a protective coating, keeping the wet mixture away from the sides of your tin and the flour gives the cake something to grip onto so that it still rises well, as well as absorbing some of the moisture from the cake around the edges. What goes into making homemade cake release?If you search the internet, you\u2019ll find loads of suggestions for the best way to line a tin to ensure that your cake doesn\u2019t get stuck. These range from simply coating the tin in butter, to more unusual ideas like using ground almonds or sugar.My cake release recipe uses a combination of vegetable shortening, plain flour and vegetable oil.The shortening provides the slipperiness needed to ensure the cake leaves the tin easily, the flour provides something for the cake to grip onto so it still rises well, and finally the oil helps soften the mixture so that it\u2019s easy to coat the tin. How do you use cake release?Unlike the cake release spray you can buy in the shops, this homemade version needs to be brushed over the inside of your baking tin.Make sure that your coating isn\u2019t too thick otherwise you may find that you can still see little patches of it on the outside of your cake once it\u2019s baked. If you do spot any patches, once your cake has cooked, gently brush the outside of your sponge with your pastry brush and you\u2019ll remove any excess. Is this cake release suitable for all types of cake?Whilst I\u2019d like to say \u201cyes, use it for everything!\u201d. I\u2019ve definitely found that it works better with some cake recipes than others.Firstly, you want to only use it on pale-coloured sponges. If you use it for a chocolate cake (for example), you\u2019ll find you get patches of lighter colour on the outside of the cake (it\u2019ll work fine and taste fine, it just might not be very pretty). I\u2019m working on a chocolate version, that I hope to share with you soon.Secondly, some sponges are softer than others and more prone to sticking. I would therefore only use it for cakes that are recommended as for being suitable for baking in a bundt tin (or other unusually shaped and impossible to line with greaseproof paper-type tins). So, can you suggest some cakes I can use it for?Of course, here\u2019s a selection of delicious Bundt cakes from some of my favourite food bloggers\u2026 How long does cake release last and how should it be stored?This cake release lasts for about a month. Once it\u2019s made, pop it into a jar or airtight container and store it in the fridge until it\u2019s needed. I don\u2019t have all of the ingredients listed in your recipe, Is there something else I can use instead?As you can imagine when I set myself the task of creating my own cake release goop, I tested out LOTS of options to investigate which worked best. This included ones similar to mine, made with shortening, flour and oil, just butter (and other fats), butter coated with flour, and some other more usual methods.If you don\u2019t have the shortening, flour and oil listed in my recipe then have a read though to see which other options could work for you.My favourite alternative is to coat the cake tin with butter or shortening and then sprinkle it with flour. I found I had very good results with this method, but I wasn\u2019t a huge fan of it overall as it was tricky to get an even coating of flour over then tin and could be quite messy when trying to remove any excess flour.So what about some of the other methods\u2026Simply coating with butter, oil or shorteningUnless you happen to have a very non-stick tin, then I really wouldn\u2019t recommend using just a fat to line your tin.The main reason is that it just doesn\u2019t work very well. The cakes I tried stuck.However, its not just their failure to do the job of stopping the cake sticking to the tin that means I wouldn\u2019t recommend using them. I also found that the rise on the cakes lined with just fat was worse, leading to denser, less fluffy sponges. The edges of the finished cake were crispier and absorbed the flavour of whatever fat I\u2019d used. This was particularly grim for the cakes lined with just oil, which had soaked into the sponge giving them a greasy flavour.A layer of butter or shortening and then a thin coating of flour (my favourite alternative)I actually really liked the results from this method. The cakes came out easily and had a good flavour.However, it\u2019s such a faff. Firstly to rub butter or shortening into every nook and cranny of my tin (and some tins are very intricate), and then to attempt to get a thin coating of flour over the fat. I ended up with some areas thicker than others and wasted flour as I tipped out the excess.A layer of oil sprinkled with ground almondsThis one was recommended by King Arthur Flour as a good method for lining cake tins (along with the next one too).As with the butter and flour method listed above, I found that this one worked well for actually getting the cake out of the tin. However, it gave my cake the flavour of almonds, which unless you happen to be making as almond cake, isn\u2019t necessarily what you\u2019d want.I also wanted to avoid using nuts in my standard cake release to ensure there were no accidents with this cake release being used on a cake that should be nut-free.A layer of oil sprinkled with sugarThe cakes lined with oil and sugar came out of the tin pretty well (needed a bit of a bang on the bottom, but came out eventually). However, they were so very sweet. What is this recipe free-from? Who is it suitable for?The ingredients I used to make this recipe are all free from the following allergens. However, please check any labels carefully for allergens you need to avoid as brands can vary, and product recipes can change over time.Suitable for Vegetarians and VegansEgg-FreeDairy-FreeTree Nut-FreePeanut-FreeSesame-FreeSoya-FreeSulphur Dioxide & Sulphite-FreeLupin-Free Can this cake release be made gluten-free?Yes, simply substitute the plain flour listed for a gluten-free plain flour. Other cake release recipes use a greater quantity of oil. Why is yours lower?When I tested my cake release I found that the cakes made using a cake release comprising of shortening, flour and oil came out of the tins well. However I also found that they were darker and crunchier around the edges than some others, and also that in some cases they rose unevenly, with a smaller rise around the edges and a big peak in the middle.After some experimentation I realised that the high quantity of oil was what was causing both of these problems. To rectify this, I reduced the volume of oil significantly, so you have just enough to be able to easily brush it onto the tin.Another advantage to using less oil is that the cake release goop is slightly thicker than others you can make, making it easier to see if you\u2019ve coated the whole tin without missing any spots. Why do you mix the shortening and flour together before adding the oil?Some cake release recipes I\u2019ve seen using a similar combination of ingredients tell you to simply mix everything together and brush it onto your tin. However, when I tried this I found that it was difficult to get all of the lumps out of the vegetable shortening. Beating together the flour and shortening first before adding the oil gave a much smoother result. Cake ReleaseHow to make homemade cake release. Perfect for ensuring your cakes don’t stick in even the trickiest of tins.]]>]]> Print Pin Rate Save Go to CollectionsActive Time: 5 minutes minutesTotal Time: 5 minutes minutesServings: 200 g]]>Cook ModePrevent your screen from going darkINGREDIENTSMetric \u2013 US Cups\/Ounces100 g vegetable shortening – soft at room temperature75 g plain flour2 tbsp vegetable oilINSTRUCTIONSBeat together the vegetable shortening (100g) and plain flour (75g) until fully combined and the mixture is smooth.Add the vegetable oil (2 tbsp) and beat into the other ingredients until combined.NOTESThis recipe makes approximately 200g of cake release which is sufficient to line c. 20 tins. Nutritional information is per 10g of cake release (enough to coat a 3 litre bundt tin). If this is your first time making this recipe or you have a question then please have a read through all of the FAQs at the start of the recipe post as I\u2019ve done my best to answer all of your questions there. If you have a question that I\u2019ve not covered, then please leave a comment and I\u2019ll do my best to help. WANT TO HEAR ABOUT NEW RECIPES FIRST?SUBSCRIBE to the Charlotte\u2019s Lively Kitchen Mailing ListNUTRITIONAL INFORMATIONCalories: 59kcal | Carbohydrates: 2.7g | Protein: 0.4g | Fat: 5.2g | Saturated Fat: 1.4g | Sodium: 30.2mg | Fiber: 0.1g | Sugar: 0.1g Any nutritional information provided is the estimated nutritional information per serving. Please refer to my guide to Charlotte\u2019s Lively Kitchen nutritional information if you would like to learn more about how this is calculated.Author: Charlotte Oates<\/p>\n","protected":false},"excerpt":{"rendered":"
How to make homemade cake release. Perfect for ensuring your cakes don\u2019t stick in even the trickiest of tins.Skip to the recipe | Recipe FAQsOne type of cake that until now has been missing from my site is a bundt cake. The reason for this is simple \u2013 I find the idea of them a […]<\/p>\n","protected":false},"author":1,"featured_media":1195,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"tdm_status":"","tdm_grid_status":"","footnotes":""},"categories":[4],"tags":[],"class_list":{"0":"post-1194","1":"post","2":"type-post","3":"status-publish","4":"format-standard","5":"has-post-thumbnail","7":"category-deserts"},"_links":{"self":[{"href":"https:\/\/sanabaking.snipsglow.com\/index.php?rest_route=\/wp\/v2\/posts\/1194","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/sanabaking.snipsglow.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/sanabaking.snipsglow.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/sanabaking.snipsglow.com\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/sanabaking.snipsglow.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1194"}],"version-history":[{"count":0,"href":"https:\/\/sanabaking.snipsglow.com\/index.php?rest_route=\/wp\/v2\/posts\/1194\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/sanabaking.snipsglow.com\/index.php?rest_route=\/wp\/v2\/media\/1195"}],"wp:attachment":[{"href":"https:\/\/sanabaking.snipsglow.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1194"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/sanabaking.snipsglow.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=1194"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/sanabaking.snipsglow.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=1194"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}